RELIC WRAP™ Archival Packaging & Storage

RELIC WRAP PTFE Packaging

Protective Tape & Film for Archival Packaging and Storage

RELIC WRAP™ protective PTFE tape & film is the safe way to package, archive, store and transport fine art, books and artifacts. Made in the USA, RELIC WRAP™ is available in three forms to allow for complete flexibility in your packaging needs.

PTFE is an optimal material to provide the protective layer nearest to valuable art. It is inert, soft, flexible, temperature resistant to 550°F (288°C), acid-free and will not stick to the objects it is protecting. PTFE is also a thermal insulator.

RELIC WRAP™ is completely unaffected by ultraviolet (UV) radiation, incandescent or fluorescent light exposure. It will not rot or support fungus for mildew.


Details

RELIC WRAP™ Packaging Film

Ideal for filling voids around artifacts that are non-uniform in size, RELIC WRAP™ is also used as a protective layer that can be wrapped around any form of art, providing a nonstick, colorfast, conforming inner layer before additional packaging layers are applied. RELIC WRAP™ Film is available in rolls up to 10” wide, 0.003" thick, and 1,000' in length.

Standard sizes include:

  • 10" (W) x 100' (L)
  • 10" (W) x 500' (L)
  • 10" (W) x 1,000' (L)

Custom sizes available on request including any width below 10" and length below 4,500'. Contact us for more details.

RELIC WRAP™ Packaging Tape

The same high quality PTFE as the film, RELIC WRAP™ Tape is used for wrapping around parts of objects to secure them to a base for transportation. The tape is easy to apply, non-adhesive, and easy to remove when unpacking. It even offers some “give” to allow for tight securing without putting too much strain on the object. Available in 1" wide x 100' long rolls.

RELIC WRAP™ Storage Recommendations

Technetics recommends that our PTFE tapes are stored and maintained in a controlled environment and the shelf life shall not exceed five (5) years. A controlled environment shall be clean and temperature at or below 72°F (22°C) with relative humidity not to exceed 50%. In addition, all material must be stored in its original condition and shipping containers. Should this become a concern, please contact us to discuss your specific requirements.


Resources

RELIC WRAP

Download

For more on PTFE and polymer solutions products and services, get in touch with us today.

Contact A Representative